BQ27742-G1: Will the checksum be updated in during usage

Yan Yu Tuan

Prodigy 140 points

Part Number: BQ27742-G1

Hi sir,

I am confirming the checksum.

Will it be updated in during usage?

If so, what conditions would cause it to be updated?

Please help me answer.

Thanks!

10 months ago

0 Jonny 10 months ago

TI__Mastermind 19701 points

Hello,

Yes the checksum will be updated during usage. Essentially because of the way that the checksum is calculated, it is updated each time the data memory changes.

Regards,

Jonny.

0 Yan Yu Tuan 10 months ago in reply to Jonny

Prodigy 140 points

Hi Jonny,

Good answer.

Then, could you help me check about Ra max delta?

Is it need to be adjustment before golden learning ?

If set to default, what impact ?

Best Regards,

0 Jonny 10 months ago in reply to Yan Yu Tuan

TI__Mastermind 19701 points

Hello,

You should be able to use the default for this value, but if you wish to edit this value please refer to the following image taken from the BQ27742-G1 TRM.

Regards,

Jonny.

Power management

Power management forum

BQ27742-G1: Will the checksum be updated in during usage