LM25037-Q1: UCC24624,TL431

pooja kattimani

Part Number: LM25037-Q1
Other Parts Discussed in Thread: TL431, , UCC24624, LM25037, LM5036

Hello there, I'm going to use LM25037-Q1 for controlling a half bridge converter and UCC24624 Dual-Channel Synchronous Rectifier Controller for secondary side also an TL431 and optocoupler isolation for compensation circuit. Is it okay to implement ...

Vin=30-72V

Vout=12V

Po=400W

6 months ago

0 Hong Huang 6 months ago

TI__Guru 54055 points

Hi,

LM25037 is ok. I assume it is used in a push-pull, ucc24624 is target LLC so not good for push pull.

0 pooja kattimani 6 months ago in reply to Hong Huang

Prodigy 50 points

Can You suggest the secondary side gate driver for the half-bridge circuit ensures proper switching? Is there any reference available for designing the compensator circuit and Driver circuit for the Half bridge converter using LM25037? The converter specifications are given below.

Vin=30-72V

Vout=12V

Po=400W

0 Hong Huang 6 months ago in reply to pooja kattimani

TI__Guru 54055 points

Hi,

UCC21225.

Also, if you do not require a automotive grated part, you may consider other half bridge PWM controllers such as LM5036 which has SR drive signals.

If you do need auto motive graded then you would need to find a corresponding one. I am asking since UCC24624 is not a auto motive graded part. So I would suggest considering something like LM5036.

+1 pooja kattimani 6 months ago in reply to Hong Huang

Prodigy 50 points

Since we Require for automotive grade, we selected this LM25037.

Drive also we need Automotive grade. and kindly suggest the drive IC which support for our

converter specifications.

0 Hong Huang 6 months ago in reply to pooja kattimani

TI__Guru 54055 points

Hi,

please go to the below link to pick up one that meet your need, with -Q1 suffix.

www.ti.com/.../products.html

+1 pooja kattimani 6 months ago in reply to Hong Huang

Prodigy 50 points

Thank you for your information.

Power management

Power management forum

LM25037-Q1: UCC24624,TL431