The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 152 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS92630-Q1: Reverse PWM signal

Jimmy Gong
Expert 3600 points
Part Number: TPS92630-Q1

Hi team,

This is FAE Jimmy support automotive application.

I have a question that since MCU is end-customer and my client is charge of designing LED part. the situation is that they would like to use MUC's GPIO to control LED Driver's PWM but the GPIO from MCU is reverse logic. it mean that when duty = 100% the LED driver can't light up. I know that change software is the easiest way to fix this situation but MCU is end-customer that my client  can't change. at this situation do we have negative triggered PWM LED driver? otherwise I think we only can add reverser at PWM. 

if you have any idea please let me know. thanks

BR,

Jimmy