This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM5185: LM5185 PSPICE SIMULATION

Part Number: LM5185

Hello,

I install PSPICE FOR TI in my personal computer and it work.

I  try the LM5185 with the flyback of the snvu869 application. The simulation does't work: the result gives after a drop zero at the output and not stabilization at 16.4V. Is a particular think to do?

Best regards,

Cedrick Biellmann