Hello,
My customer requested TI's review for the TPS568230RJE design.
Please review their design below to see if there are any problems.
Thank you.
JH
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
My customer requested TI's review for the TPS568230RJE design.
Please review their design below to see if there are any problems.
Thank you.
JH
Hi JH
will get back to you shortly, in the mean time may I know who is the customer and end equipment
Thank you
Savith
Hi JH
1. assuming 1% Vin ripple the calculated Cin is 30uF, the current Cin is very low even with out considering Derating
2. Cout is lower than recommended Cout min in the datasheet even without derating
3. Pls use the recommended inductor in the data sheet
Thank you
Savith
Hi Savith,
Thanks for your reply.
For the customer information, please email me:
BR,
JH