Hello teams
Would you please check our schematic of TPS54425?
If you have any problem, please give me.
this circuite usage is bellow.
Vin 12V
Vout 5V
Iout 1.1A
Ta :85℃
we guess it does not meet phase margine.
Best regards,
akashi
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello teams
Would you please check our schematic of TPS54425?
If you have any problem, please give me.
this circuite usage is bellow.
Vin 12V
Vout 5V
Iout 1.1A
Ta :85℃
we guess it does not meet phase margine.
Best regards,
akashi
Hi Akashi,
I would recommend you can follow the Webench design as shown below:
Power Designer (ti.com)
I noticed that you did not add Cff. For 5Vout application, I would highly recommend you to add Cff for better loop response performance. Otherwise, the phase margin will not be good. Thanks!
BRs
Lucia