Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ33100: .SENC program issue

Part Number: BQ33100

Hi ,After i program the .senc file, my BQ33100 module does not work (no communication), the REG27 2.7V is ok, but  it seems enter to the seal mode.

anyone can help me with this issue .