This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
We are currently planning to use the TPS55010RTER for generating 5V at Fsw=100kHz.
As per the datasheet, the resistance to be connected to the RT/CLK pin should be within the range of 1070kΩ to 42.2kΩ.
I have two questions regarding this:
Regards, Takumi
Hi Takumi,
Here are my comments:
1. The tolerance of the resistors should also be within the range of 1070kΩ to 42.2kΩ.
2. Yes that's right, operation is not guaranteed more than 1070kOhm.
Best regards,
Varun