This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ25628: REG0x14 Q1_FULLON bit and OTG operation

Part Number: BQ25628
Other Parts Discussed in Thread: BQ25622, BQ25620

Datasheet section 8.3.10.3.1 states that

When the BQ25628 is in OTG mode, Q1 is off to block power from PMID to VBUS.

in section 8.6.2.9, REG0x14 bit 7 'Q1_FULLON' is described as

Forces RBFET (Q1) into low resistance state (26 mΩ) , regardless of
IINDPM setting.
0h = RBFET RDSON determined by IINDPM setting (default)
1h = RBFET RDSON is always 26 mΩ

can Q1 be forced into the low resistance state doring OTG operation, effectively allowing power to be sourced via the VBUS pin (instead of PMID)?