This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.


Part Number: TPSM82810

TPSM82810 PG pull-up voltage can be connected to VIN voltage?

For example) VIN = 3.3V, PG pull-up = 3.3V


  • Hello Manwoo,

    Yes, the PG can be connected to Vin via a pull up resistor, as the datasheet states:

    A pullup resistor can be connected to any voltage not larger than VIN.

    The absolute maximum voltage allowed is Vin + 0.3V. A recommended value is 100kOhm.

    Please let me know, if you have further questions.

    Regards, Werner

  • Hi, Wener!

    Thanks for your reply. It is cleared!

    I was a little confused the senstence in datasheet,

    "The power good output requires a pullup resistor connected to any voltage rail less than VIN."