This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ27520-G4: Uploading file to GPC for Chemical ID selection

Part Number: BQ27520-G4

Hi 

Based on "slva725a Simple Guide to Chemical ID Selection Tool (GPC)", I just need to upload the data at room temperature:

config.txt

roomtemp_rel_dis_rel.csv

But why am I receiving below message that data for high/low temperature and high/low rate are required?

Pls advise.

Thank you.

Rgds

Dan