Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 64 subscribers
  • Views 92 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS54240-Q1: CS2305251: PPAP20231227-028858

Tamas Szabo
Prodigy 50 points
Part Number: TPS54240-Q1

TEXAS INSTRUMENTS - PCN : 20231220001.2 - Effective Date : 2024/06/20 - PCN Types : Fabrication site change / Qualification/Country of Origin/New Subcon (FAB)

About  the "CS2305251: PPAP20231227-028858", 
Here I create the first post for the groups as Joselito Go requested.

TPS54240QDGQRQ1
TPS57040QDGQRQ1
TPS57040QDGQRQ1
TPS57060QDGQRQ1
TPS57060QDGQRQ1
TPS57060QDGQRQ1
TPS57140QDGQRQ1
TPS57140QDGQRQ1
TPS57140QDGQRQ1

According to our understanding in this PCN the change is related additional site. DQM risk assessment
and Test Flow chart related to this change has already been uploaded in Agile from my side.
Texas, as supplier needs to confirm:

- ESD standard for the new locations and the following information
should be available in the PPAP.
- Machine capability analysis
- Process capability analysis
- Run at rate
- Cleanliness (process chain)

Since we did not find these in PPAP-s we need help/advice where to find/identify them in PPAP documents.

Thank you and best regards,
Tamas Szabo
Supplier Quality Engineer
Flex Zala A