UCC2897A: UCC2897A

Shankar Kanki

Part Number: UCC2897A
Other Parts Discussed in Thread: UCC2808A-1, UCC2808A-2

Dear TI team,

We have below requirement, Could you please go through it and suggest us best possible part number from TI.

Requirement:

Input voltage : 20- 35 ( Nor 28V) DC

Output voltage : Isolated 24DC output
Output current : 10A Continuous

5 months ago

0 Hong Huang 5 months ago

TI__Guru 54485 points

Hi,

I suggest to use push-pull converters since the input voltage is low then an active clamp may not provide benefit. But ok to use.

For push-pull you can consider ucc2808A-1 or ucc2808A-2.

0 Shankar Kanki 5 months ago in reply to Hong Huang

Prodigy 170 points

Hi Hong,
Could you please share any reference schematic using UCCxxx?

0 Hong Huang 5 months ago in reply to Shankar Kanki

TI__Guru 54485 points

Hi,

We do not have a design on your specs. For push-pull similar reference designs:

50 W Push Pull Converter reference design using the UCC38083 (Rev. A) (ti.com)

LM5030 Application: DC - DC Converter Utilizing the Push-Pull Topology

There are more on this link:

Search results | TI.com

Power management

Power management forum

UCC2897A: UCC2897A