Dear team,
I am working to design an automotive LED system where this IC is very much suitable. For verification and evaluation, Pspice model is required.
The product page doesn't have the simulation file.
Please support.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Dear team,
I am working to design an automotive LED system where this IC is very much suitable. For verification and evaluation, Pspice model is required.
The product page doesn't have the simulation file.
Please support.
Hi Shwetanshu,
Our expert is out of office, will give you feedback when comes back.
Hi Patrick,
The requirement here is a little urgent. Please check the avaialbility of any alternate expert and provide the feedback as soon as possible.
Hi Shwetanshu,
There is a holiday so we will give you feedback after back on 5/6. Thanks for your patience.
Hi, Shwetanshu
What is the EE at your side?
We don't have the Pspice model. But we have the simplis model, is it OK for you?
Hi Zhiqian,
Thank you for your response. The simplis model would work, please share the same.
Hi, Shwetanshu
Pls send me with an email about your company and project information. Then I will share the simplis model to you
Hi, Shwetanshu
As you cannot receive the message in E2E, pls leave your contact window I will check with you.