TPS54A24: Unable to configure the transient pulse current setting in Webench

Lee Yee Yong

Part Number: TPS54A24

I'm currently encountered with issue which couldn't configure transient pulse current setting in Webench. Setting would like to configure as below:

Initial Load Current: 6.3A
Minimum Load Current: 0.7A
Initial Time Delay (s): 0
Fall Time (s): 0.0000224
Rise Time (s): 0.0000224
Pulse Width (s): 0.01

6 months ago

0 Amod Vaze 6 months ago

TI__Mastermind 24700 points

Hello,

I have moved this question over to the WEBENCH team who can take a look.

Thanks,

Amod

0 Sateesh Goudappanavar 6 months ago in reply to Amod Vaze

TI__Intellectual 1820 points

Hi Lee Yee Yong,
CC: Amod Vaze

Thank you for reporting this issue.

We were able to replicate this issue and looked into details.

Found that there is a minor bug in calculations backend.

We have started looking into this issue.

Kindly allow us some time to fix this.

We will keep you posted regarding further updates.

Thank you

Best Regards,
Sateesh A G

0 Sateesh Goudappanavar 6 months ago in reply to Sateesh Goudappanavar

TI__Intellectual 1820 points

Hi Lee Yee Yong,

We have fixed this issue.

Coming Monday i.e. 3rd of June 2024, we will release these fixes during scheduled code freeze, we can expect fixes to reflect on WEBENCH Production by 4th June 2024 or at the max 5th June 2024.

We will keep you posted regarding the same.

Thank you

Best Regards,
Sateesh A G

Power management

Power management forum

TPS54A24: Unable to configure the transient pulse current setting in Webench