This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMZ12003: LMZ12003 Enable Pin Control Mechanism

Part Number: LMZ12003

Hello, I am attempting to use the LMZ12003 for a current limiting application. I would like to know if there is a way I can prevent potential damage to an IO bank to an FPGA that is driving the enable pin, since this enable pin is pulled up to Vin. This Vin obviously exceeds the voltage that the IO pin is rated at. I want to be able to use this FPGA IO pin to basically enable/disable this regulator.