Other Parts Discussed in Thread: UCC28C56EVM-066
HI Team, I have two question about UCC28C56EVM-066 board:
1) In the EVM, the 15Vdc Vout start form 40V of HV_IN power supply. Is possible to modify the EVM for start Vout (15Vdc) from 500V of HV_IN power supply?
2) On UCC28C56EVM-066 board I have implemented the isolation circuit for secondary side regulation (SSR) shown below. Is possible modify this circuit for have a Vout=12Vdc?
Thank you.
Best regards
Bruno.