• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 87 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DCP022415D: Series connected of multiple DCP022415D

Tobias Josua
Prodigy 20 points
Part Number: DCP022415D

Tool/software:

I am trying to use this component to create a +/- 60 V supply for the op-amps in my test device.

In principle, is that possible, i.e. to connect four voltage modules in series to achieve the desired output voltage of +/-60V?

  • 0
    TI__Guru 50351 points

    Hello Tobias 

    I think it is not possible. I think the voltage difference between the lowest potential node on the primary-side and the highest protentional node on the secondary-side is greater than 42.5V in your configuration.  

    -EL