This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS61020: Avoiding intermittent oscillation

Part Number: TPS61020

Tool/software:

Hi support team,
I am using the TPS61020 under the following conditions.

VIN = 2.7 ~ 5.5V
VOUT = 5.2V
PS = High (power save mode disabled)

There are no particular problems during normal operation, but for about 0.1V before and after the input voltage exceeds the output voltage, the switching becomes intermittent, and noise is output.
Is there any way to avoid this intermittent oscillation?

Regards,
Dice-K