Other Parts Discussed in Thread: ASH
Tool/software:
Hi Team
do you know BQ25618 have a pull down resistor here? and what is the function.
BRs
Brian
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Brian,
Ash shown in Section 9.2.2.2, "During high current output over 700 mA in boost mode, a 10-kΩ pull-down resistor on VBUS is recommended to keep VBUS low in case Q1 RBFET leakage gets high."
Regards,
Mike Emanuel