• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 65 subscribers
  • Views 197 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TPS65313-Q1: MCU Error Signal Monitor Reset action is not performed

TPS65313-Q1: Attaching debugger while WD_RST_EN is enabled

khaled Mohamed
Prodigy 50 points
Part Number: TPS65313-Q1

Tool/software:

Hello,

Is there a way to be able to connect the debugger (Lauterbach Trace 32) automatically and be able to debug in the code by setting breakpoints while WD_RST_EN is enabled. Without having a message target reset detected.

Thanks

  • 0
    TI__Genius 10772 points

    Hi Khaled,

    The device expert is currently out of the office. I have routed this to some of the other engineers for support. Please expect some delay accordingly.

    Thanks,
    Field

  • 0 in reply to Field Tolson
    TI__Genius 14800 points

    Hi Khaled,

    I did not get your question exactly what is the ask here related to TPS65313 that I can help with. Since I am not familiar with debugger that you are mentioning so I guess you better had an idea about how to automate. But as far as communication with device is concerned, then TPS65313 has standard SPI interface to communicate with. So I am sure you can find a way with debugger to connect with device using SPI. 

    But then what is is that you want to do with WD reset is enabled?

    BR,

    Ishtiaque