The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS25942A: TPS25942

Part Number: TPS25942A

Tool/software:

Hi

Is it mandatory to set VPGTH(pin3) as 11V in TPS25942. I am setting this value as 6V for 12V oring application. Please reply