Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 64 subscribers
  • Views 106 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS2115A-Q1: TPS2115A-Q1 review schematic

Lawrence He
Expert 2920 points
Part Number: TPS2115A-Q1

Tool/software:

Hi, Support Team

We will use TPS2115A-Q1, schematic as below chart.

have any concern?

schematic:

if any suggestion, Please advise me.

Thanks,

Best regards,

Lawrence

  • +1
    TI__Intellectual 760 points

    Hi Lawrence,

    Looking over the schematic I didn’t notice any concerns.

    I do want to point out that the current limit is set at .735 amps make sure that your nominal current is below .486 Amps to avoid unintentional current limit tripping. In addition, the high side of the current limit is 1.02 amps, make sure that all devices connected to the output can withstand the current.

    If you have any other questions let me know!

    Best Regards,

    Nicholas