• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 256 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS2540A difference?

Nick Hazzard
Prodigy 125 points
Other Parts Discussed in Thread: TPS2540A, TPS2541A

I'm looking for more information on the auto detect mode operation of the TPS2540A chips.  The only info in the datasheet says that it has "a longer detach detection time, so that it can support certain uniqe non-compliant devices."  Can someone please explain in more detail how this works and why it can support additional devices despite the fact there is still only two charging modes, the iPhone divider mode, and the BCS1.2 mode?

  • 0
    TI__Mastermind 42795 points

    Please see the tDCPLOW (Low DP_IN period in DCPLOW DCP mode) spec at the bottom of pg 6. Figure 32 on page 18 illustrates the timing.

    Basically, BCS1.2 sets a 1 second limit for the PD to connect. TPS2540A (and TPS2541A which releases in October) just give these "non-BCS standard" devices a longer time to connect.