TPS2410: Impact on DCDC loop

Hailiang Zhang

Part Number: TPS2410

Tool/software:

Hi Team,

If the remote sense of DCDC is connected to the downstream stage of TPS2410, does TPS2410 affect the output voltage and the loop of DCDC source1? Pls help comment.

Regards,
Hailiang

4 months ago

0 Shiven Dhir 4 months ago

TI__Mastermind 21000 points

Hi Hailing,

You wish to connect DCDC source to VOUT. Is that correct?

Regards,

Shiven Dhir

0 Hailiang Zhang 4 months ago in reply to Shiven Dhir

TI__Expert 6455 points

Hi Shiven，

I want to place TPS2410 on the output side of DCDC to achieve reverse current protection. Considering the impedance of TPS2410/oring and line loss , I am going to connect the remote sense of DCDC to the connector of the board, which is the output side of TPS2410/oring.

Regards,
Hailiang

+1 Shiven Dhir 4 months ago in reply to Hailiang Zhang

TI__Mastermind 21000 points

Hi Hailiang,

This is the motive right?

There shouldn't be a problem in doing so.

Regards,

Shiven Dhir

Power management

Power management forum

TPS2410: Impact on DCDC loop