UCC28704: Design Review of UCC28704DBVR-1

Part Number: UCC28704

Tool/software:

Hello,

Is it possible to get a design for the attached schematic. We will work with GCI regarding the transformer.

Thank you,

JonTI Design Review.pdf

  • Hi Jon,

    Than k you for reaching out.

    I think the schematic looks ok to me, but some few suggestions:

    1.  R6 seems to high at 200 ohms. Try reducing this to 22-50 ohm range.

    Other things looks ok, but needs to be checked with the transformer specifications of Lm and turns ratio. There is a reference design close to your specifications.

    https://www.ti.com/tool/PMP8286

    Please let us know if you have any questions.

    Regards,

    Harish