• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 109 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ25750EVM: BQ25750EVM

Glen Miranker
Prodigy 10 points
Part Number: BQ25750EVM
Other Parts Discussed in Thread: BQ25750

Tool/software:

when using the BQ25750EVM how is the battery charge current set?

when using the BQ25750EVM how is the output current limit set?

Thanks

  • 0
    TI__Mastermind 23630 points

    Hello Glen,

    With the BQ25750, you can set the charge current in 2 ways. The 1st is to change the hardware ICHG resistor. The 2nd is to change ICHG register.

    The BQ25750 does not have a specific output current limit. The charge current should be no greater than the charge current.

    Best Regards,
    Ethan Galloway