Tool/software:
Hello team,
Good day!
There is a using case of LM5155-Q1, VCC is about 6V, and the gate voltage is 6V as well, but this voltage is not enough to drive MOS, so do you have methods to improve the drive voltage?
Thanks!
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Hello team,
Good day!
There is a using case of LM5155-Q1, VCC is about 6V, and the gate voltage is 6V as well, but this voltage is not enough to drive MOS, so do you have methods to improve the drive voltage?
Thanks!
Hello Moritz,
Thanks for your feedback.
If VCC voltage cannot be improved, is there any other methods to improve the gate driving voltage?
Best regards
Daniel
Hello Daniel,
The internal gate driver voltage is limited to VCC.
What you could do is to build a external driver stage:
Best regards
Moritz