• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 42 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMR38025-Q1: q current

SAJAL GOYAL
Prodigy 70 points
Part Number: LMR38025-Q1

Tool/software:

stand by current in datasheet is mentioned 40uA but in PCB it is 9 miliamps any guidence to reduce q current?

  • 0
    TI__Guru 73570 points

    Hi Sajal,

    Thank you for posting.  The experts of this device are currently out of office. I studied the datasheet and it seems you are using the FPWM version. You need to replace the IC with the highlighted version as shown below in the table.

    Hope this clarifies.

    Regards,

    Youhao