[FAQ] BQ76952: BQ76952EVM cell simulator

Hello Wenjia,

The cell simulator is already installed on the EVM. To use the cell simulator you will need to connect cell inputs using shunts on the J14 and J23 headers. You can refer to section 4.1 Cell Simulator of the BQ76952EVM User's Guide (Rev. A) for more information on using the cell simulator. If your cell count is less than 16S you can refer to 4.5 Reducing the Cell Count of the BQ76952EVM User's Guide (Rev. A) for information on reducing cell count.

Best regards,

Thomas Rainey