UCD9090-Q1: Multiple part recommendations

Hi Matthew,

Our expert on this part is currently out of office, and they will get back to you when they return.

Regards,

Troy

Thank you for letting me know. Do we know when they will be returning to office? 

Thank you, can you also make recommendations for devices that fit the following specs. 

I have some DC-DC power regulator needs and I was hoping TI could recommend the best DC-DC non-isolated match.  The input will be +5V.

1. 0.88V, 25A, 3%(1%DC accuracy + 2% AC ripple) , step response 9A over 350ns, ramp up time ≤ 5ms.
2. 0.8V, 4A, 3% DC accuracy, ramp up time ≤ 3ms
3. 1.2V, 500mA, 3% DC accuracy, ramp up time ≤ 5ms (maybe an LDO fed by 1.8V)
4. 1.8V, 2A, 3% DC accuracy, ramp up time ≤ 3ms
5. 3.3V, 2A, 3% DC accuracy, ramp up time ≤ 5ms

Hello,

Our product line only supports multiphase controller and power stages. Are you looking for single phase DC/DC converters? 

Regards

I believe the customer would like a device that takes the 5v input and then has the 5 outputs if that is possible.

If not, then we would have to use 5 single DC/DC converters. Can you help loop in the team that could recommend 5 individual devices that could provide the 5 required outputs?

hello,

sorry, I'm not sure how to reach to the DC/DC converters product line. You may change the subject title and the moderator will connect you with the product line.

Regards

Can you provide information about the UDC9090-Q1 3.3V supply current when the device is operating.  The data sheet only has data for supply current values are based on device programmed but not configured, and no peripherals connected to any pins.  That is only 50mA but would like to know a more realistic value.

This is the information available at this time.

I would say the total supply current is 50ma + 48ma = 98ma max.

Regards