• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 64 subscribers
  • Views 154 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ20Z80: Programming via Command Line Using CommandLine Programmers

Corrine Witte
Prodigy 10 points
Part Number: BQ20Z80
Other Parts Discussed in Thread: BQEVSW,

Tool/software:

Hello,

I'm trying to program my BQ20z80 chip via the MKS-SAI-001 using the command line programmers that help is given as part of the BQEVSW.  I'm sending the command via command line: 

Prog20zx.exe "C\Programming_Files\FileName.senc" -i -p -r

I consistently am getting error code 302 for adapter not connected, even though I can communicate via the BQ Evaluation software with the chip, sending the file to program using the "Pro" tab and I can communicate via my LabVIEW vi's to write and read board data.  What am I missing in the command line for it not to find the adapter?