• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 49 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ25756: Doubt regarding driver strength BQ25756

Juan López Jódar
Prodigy 130 points
Part Number: BQ25756

Tool/software:

Hello i was looking the different registers of the BQ25756 and i noticed one of them is used to configure the driver streng of the Buck-Boost FETs the register i am talking about is in the attached picture. My question is what is precisely this driver strength and why would i choose one configuration over the others.
Thanks in advance.
Juan.

  • +1
    TI__Genius 16610 points

    Hello Juan,

    I would recommend using choosing the highest driver strength (the default) for now. You can choose a lower drive strength to prevent overshoot or to possibly reduce EMI from switching noise.

    Best Regards,
    Ethan Gallowau