This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM3710: EN/UVLO pin pullup

Part Number: LM3710
Other Parts Discussed in Thread: LM7310,

Tool/software:

In a previous discussion relating to this part (link) it was identified that using a single 360k pullup resistor to VIN was acceptable (so without a complete potential divider) for the EN/UVLO pin. I want to make sure that this is acceptable when VIN is higher than the EN/UVLO pin's Absolute Maximum voltage, which is 6.5V. In my application VIN could be as high as 9V.