• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 64 subscribers
  • Views 121 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM36010: LM36010 IIC initialization command

Tonyx.wu
Genius 3105 points
Part Number: LM36010
Other Parts Discussed in Thread: USB2ANY

Tool/software:

Can you please provide the command for initializing LM36010 IIC? I haven't received any response after setting it for half a day.

Please provide detailed information and documents, thank you.

  • 0
    TI__Mastermind 20240 points

    Hi Customer,

    Our expert is currently out of office. He will reply to you tomorrow. Thanks for your understanding.

    Best Regards,

    Steven

  • 0
    TI__Intellectual 1510 points

    Hi Tonyx, 

    The most important setting is bit[1:0] in 0x01 register, which determines the mode of operation and the current setting register 0x03, 0x04, depending on flash or torch mode you are using. For others, you could leave default at the moment. 

    May I ask whether you are using the GUI or direct write/read register by USB2ANY? 

    Thanks! 

    Best, 

    Thank you!