This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPSF12C3: TPSF12C3/-Q1

Part Number: TPSF12C3

Tool/software:

TPSF12Cx-Q1_quickstart_calculator_A9_Galaxitis 1 (version 1).xlsb.xlsm
Hello,
I have hereby attached the 3 phase EMI IC calculator excel sheet. It would be great if I could get a confirmation on the values choosen. Additionally, I would like to get some suggestions to select the common choke too.
Application: 4.8kW charger

  • Hello,

    We are reviewing your calculator and will respond to you shortly.

    Ben

  • Hi Abhilash, 

    I had a look at the calculator. The values look realizable, and plots look stable. You can proceed with these values to start with. 

    We would recommend using nanocrystalline chokes. Please use the chokes which are around 2mH. Measure the impedance vs freq data of the nanocrystalline chokes and enter it into the second page of the quick start calculator. Based on that, you can tune any other components if needed.

    Thanks and Regards,