LM5176-Q1: The current of VISNS of LM5176

Hi Xianyang,

the VISNS is just a sensing input which only have very low current, e.g. adding a 2k resistor as not issue.

We have not characterized this input so the specific data is available for that but if you can let me know the reason for that question, I might can give a more specific answer.

Best regards,

 Stefan

Hi，e2e

    Because the VISNS is connected to BATT，when the DUT goes into sleep mode,we need to know the exact current value

Hi Xianyang,

can you let me know for which input voltage level this would be.

I will then try to get some simulation data for that.

Can you also confirm if this info is for 

- Shutdown

- Standby

(Sleep mode does not exist in Datasheet)

Best regards,

 Stefan

Hi，Stefan

   The mode is shutdown mode,EN is 0V.

Hi Xianyang,

can you let me know for which input voltage level this would be.

Best regards,

 Stefan

Hi,Stefan

   The voltage level is 9V to 36V.