Other Parts Discussed in Thread: TPS2660,
Tool/software:
Hello,
When comparing the products ① TPS26400 and ② TPS2660 on the HP, it states that ② has certifications for IEC62368 and UL2367, while ① is listed as not having any certifications. Additionally, in the TI functional safety category, ② is marked as Functional Safety-Capable, but there is no such mention for ①.
On the other hand, the technical documentation for product ① shows certificates for IEC62368 and UL2367, which is inconsistent with the above information.
Can we consider that ① also has these certifications?
If both ① and ② are certified, I believe the main differences between the two products are as follows, but are there any other differences?
- The input voltage ranges are different (① is 42V, ② is 60V).
- The response to overcurrent: ① has current limiting and latch, while ② has latch-off only.
- The difference in current limiting: ① is 2A, and ② is 2.23A
