TPS61280E: How to handle SDA and SCL connection if I2C is not used?

Grantas Šapkinas

Part Number: TPS61280E

Tool/software:

In my TPS61280E application I2C is not needed. In datasheet it is said that SCL and SDA lines must be terminated. How should I handle I2C connection?

+1 Nathan Ding 2 months ago

Hi Grantas,

We recommend to connect SCL and SDA to VIN or some other voltage rail in your system like 1.8V or 3.3V, for example.

Regards,

Nathan

Power management forum