This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
HI Experts in Ti
We have the following doubts about these registers. We want to set a 600mAh capacity to trigger ISD protection after 10 hours of power failure. The designed capacity of the battery is 1800mAh. Please advise on how to set it up. Our current design register cannot trigger this register. Thank you
Hello,
Please refer to the device Technical Reference Manual published on TI.com for how to set up the ISD values.
Regards,
Robert.