This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS536C7: TPS536C7+CSD95515 Sense line Issue

Part Number: TPS536C7
Other Parts Discussed in Thread: CSD95515,

Tool/software:

Hi,

I need help to debug an issue we are having with TPS536C7+CSD95515 to power a 0.75V rail on ASIC chip.

For the FL2_VDD0V75_ANLG rail we have made connections for the remote & local sense as per the ASIC design guide.

However, with both connections added(Remote sense & local sense) the output does not generate. We have also tried with remote sense only connection but the output still doesn’t regulate.  

Only when we DNI the remote sense resistors and connect the local sense resistors does the output comes under regulation.

I can share the relevant Power Supply side schematic and connection to Broadcom side & software file for review directly to assigned TI person. Kindly check and share any potential issues which may be preventing output from coming under regulation with the remote sense lines.

Appreciate your help on this. Let me know for any questions.

  • Hi Karan, 

    Welcome to the E2E forums, thanks for bringing this issue up with us. If you'd be willing to share the schematic and config file via this forum, please do and I can help support, however please note that this is a public forum so keep that in mind if sharing proprietary data.

    If needed, I can reach out via email and we can troubleshoot via that medium. 

    Kind regards,
    Nick Z

  • Yes kindly reach out via email or share yours.

    Regards,

    Karan

  • Hi Karan, 

    I've sent you a message via email so we can discuss and debug through that thread. 

    Kind regards,
    Nick Z