• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 348 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

[FAQ] List of FAQs for TPS922055 / TPS922054 / TPS922053 / TPS922052 LED driver

[FAQ] How to design the CSP and CSN pin components for TPS922055 / TPS922054 / TPS922053 / TPS922052?

Steven Li
Mastermind 19845 points
Other Parts Discussed in Thread: TPS922052, TPS922055, TPS922054, TPS922053

How to design the CSP and CSN pin components for TPS922055 / TPS922054 / TPS922053 / TPS922052?

  • +1
    TI__Mastermind 19845 points

    Please follow the below graphical illustration to design the CSP and CSN components. There are two points you should pay attention to - 

    • The 100Ω resistor on the CSP line: It is necessary. The package of it should be no smaller than 0603.
    • The 1nF capacitor between the CSP and CSN pins: It is optional and is for noise filtering purpose. Place it close to the CSP and CSN pins on the PCB.