• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 293 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS25751: TPS25751 and TPS26750 EEPROM Update Over I2C

Will Wang47
Expert 7670 points
Part Number: TPS25751
Other Parts Discussed in Thread: TPS26750,

Tool/software:

hi team,

Customer get one question regard "TPS25751 and TPS26750 EEPROM Update Over I2C" app note.

Customer use TPS25751, their application target voltage is 5V, but they need data swap feature. 

If customer get a blank EEPROM connected to their system, their system work in dead battery mode, connect PD source to their product, could they get 5V to power their system?

Does it OK for customer to follow the "TPS25751 and TPS26750 EEPROM Update Over I2C" app note to update a blank EEPROM to desired code?

Regards,

Will

  • 0
    TI__Mastermind 29932 points

    Hi Will, 

    Thank you for reaching out!

    The external EEPROM needs to be programmed initially so that the region headers are set up properly. The application note referenced above is for updating an image that is already present on the EEPROM.

    Please let me know if you have additional questions/concerns. 

    Best Regards, 

    Aya Khedr