WEBENCH-POWER-DESIGNER: TPS43060 Webench design error

Yezi Yang

Part Number: WEBENCH-POWER-DESIGNER
Other Parts Discussed in Thread: TPS43060

Tool/software:

Hi Webench team,

My customer tries to design with TPS43060 but got following error message. "Design update failed. Calculated duty cycle exceeds limit. Min junction temperature exceeded. Calculated duty cycle exceeds limit" Could you help to resolve the issue? Thank you

over 1 year ago

0 Umayal Ramanathan over 1 year ago

TI__Expert 5920 points

Hi Yezi,

We are able to replicate the issue. Currently analyzing to verify if its a valid fail.
We shall keep you updated on the fix.

Thanks and Regards,
Umayal

0 Yezi Yang over 1 year ago in reply to Umayal Ramanathan

TI__Prodigy 550 points

Hi Umayal,

Is there any update on this issue?

Best Regards

Yezi

0 Shaheen Makandar over 1 year ago in reply to Yezi Yang

TI__Expert 3190 points

Hi Yezi,

We are still in process of understanding the model implementation and debugging the above issue, We will get back to you as soon as we have any update on this. We will get back in a day or two with the update.

Thanks for your patience.

Regards

Shaheen

0 Umayal Ramanathan over 1 year ago in reply to Shaheen Makandar

TI__Expert 5920 points

Hi Yezi,

We have fixed the issue reported with respect to device TPS43060. The fix is currently on internal WEBENCH server and will be available on ti.com by next WEBENCH release(Tentatively by end of this month).We will keep you updated on the fix.

For an immediate reference kindly refer the design report in link mentioned below.

/cfs-file/__key/communityserver-discussions-components-files/196/8475.TPS43060-Design-Report.pdf

Thanks and Regards,

Umayal

0 Nir Flysher over 1 year ago in reply to Umayal Ramanathan

TI__Expert 3367 points

Thank you Yezi,

Thank you Umayal.

Regards,

Nir.

Power management

Power management forum

WEBENCH-POWER-DESIGNER: TPS43060 Webench design error