WEBENCH-POWER-DESIGNER: TPS43060 Webench design error

Yezi Yang

Part Number: WEBENCH-POWER-DESIGNER
Other Parts Discussed in Thread: TPS43060

Tool/software:

Hi Webench team,

My customer tries to design with TPS43060 but got following error message. "Design update failed. Calculated duty cycle exceeds limit. Min junction temperature exceeded. Calculated duty cycle exceeds limit" Could you help to resolve the issue? Thank you

5 days ago

0 Umayal Ramanathan 5 days ago

TI__Expert 5290 points

Hi Yezi,

We are able to replicate the issue. Currently analyzing to verify if its a valid fail.
We shall keep you updated on the fix.

Thanks and Regards,
Umayal

0 Yezi Yang 1 day ago in reply to Umayal Ramanathan

TI__Prodigy 550 points

Hi Umayal,

Is there any update on this issue?

Best Regards

Yezi

0 Shaheen Makandar 1 day ago in reply to Yezi Yang

TI__Intellectual 2650 points

Hi Yezi,

We are still in process of understanding the model implementation and debugging the above issue, We will get back to you as soon as we have any update on this. We will get back in a day or two with the update.

Thanks for your patience.

Regards

Shaheen

Power management

Power management forum

WEBENCH-POWER-DESIGNER: TPS43060 Webench design error