• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 117 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS6521905: Batch NVM programming

Philippe Maire
Prodigy 20 points
Part Number: TPS6521905
Other Parts Discussed in Thread: TPS65219

Tool/software:

Hi,

I designed a board with TPS6521905 that I need to program after manufacturing. For that, I use the TPS6521905-EVM board, from which I use the jumpers to connect to my external board rather than the component in the EVM's socket.

I program the TPS6521905 from a CSV file by following the steps on page 26 of the "TPS65219 NVM Programming Guide".

Does the GUI have a "command line" / batch mode that would allow automated programming? Ideally from a Linux host.

Or some off-the-shelf code that would parse the foresaid CSV, and perform all I2C accesses to program the NVM ?

Thanks for your support

Regards,

Philippe