• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 44 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC27531: Possible High Impedance Output

Keith Keller
Expert 6980 points
Part Number: UCC27531

Tool/software:

Hello,

Just want to confirm that the output of the UCC27531DR cannot go high impedance?  Even in an over-temperature condition, or other fault condition?

The "DR" version does not have the OUTH and OUTL pins.

Thank you, Keith

  • 0
    TI__Genius 13115 points

    Hey Keith,

    Thank you for reaching out with your questions regarding the UCC27531.

    If the driver is damaged, then the status of the OUT pin is not guaranteed. During operation, the output stage will either pull the pin low or pull the pin high.

    The only difference in the above diagram and the single OUT version is that the OUTH and OUTL would be connected internally.

    Let me know if there are any further questions.

    Thank you,

    William Moore