• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 63 subscribers
  • Views 110 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LP5810: analog dimming

Austin Do
Expert 3275 points
Part Number: LP5810

Tool/software:

Hello team,

My customer wants to set analog dimming, not PWM dimming.

It seems PWM duty should be set 50% even if the device is set to analog dimming mode. Is this correct?

Also, is it necessary to set 50%? How about programming another duty like 100% or 75%?

(+) LP5812: LP5812/LP5810 - Power management forum - Power management - TI E2E support forums 

(+) [FAQ] LP5812: Quick program steps guide for LP5812, LP5810 - Power management forum - Power management - TI E2E support forums

Best Regards,

Austin

  • 0
    TI__Mastermind 23150 points

    Hi Austin,

    Our expert is currently out of office. I will ask another expert to help on this thread. He will respond to you later. Thanks for your understanding.

    Best Regards,

    Steven

  • +1
    TI__Expert 5600 points

    Hi Austin,

    No, the LP5810 supports both PWM dimming and Analog dimming at the same time, which means you can set the PWM duty as any value (0 to 100%) through the Manual_PWM_x register while setting the analog dimming value through Manual_DC_x register.

    Best regards,

    Felix