BQ27542EVM: [FAQ]a question about passedcharge and fast Qmax in bq27542-G1

Hello Jack,

The only set of documentation that is available for fast Qmax and passedcharge is seened within the Techincal reference manual, typical customer leave these values at default. However fast Qmax typically is used within application with little to no idle time and this is due to the Ra table updates being dependent on long period of battery relaxation time. Passedcharge can also be seen as the amount of actual current being passed through R sense and what impedance tracking algorithm is expecting. 

Technical reference manual: 
https://www.ti.com/lit/ug/sluub65b/sluub65b.pdf?ts=1741639474776&ref_url=https%253A%252F%252Fwww.google.com%252F

Thank you,
Alan