• State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 63 subscribers
  • Views 67 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TPS62872-Q1: Low-side FET negative current limit, DC

TPS62873-Q1: Negative current limit of Low-Side FET in FPWM mode

User6781210
Prodigy 10 points
Part Number: TPS62873-Q1

Tool/software:

Hi Team,

Could you please tell me the allowable negative current of low side fet in FPWM mode?

In FPWM mode, reverse currrent can flow into low side fet in case of low output currents because of inductor ripple current.

Regards, 

  • 0
    TI__Genius 16731 points

    Hi,

    You can get electrical characteristics and device specification on device datasheet table. Please follow following Negative current limit for LS FET spec,

    Let me know if you have further support. 

    Best regards,

    Tanvee 

  • 0 in reply to Tanvee
    Prodigy 10 points

    Hi Tanvee,

    Thank you for your reply.

    From the original question*, I understand that "Low-side FET negative current limit, DC" represents the LS FET current limit during short circuit or over current protection.

    Therefore, I believe that "Low-side FET negative current limit, DC" in the datasheet is not the information I need.

    Alternatively, am I misunderstanding something, and does "Low-side FET negative current limit, DC" represent the allowable negative current of low side fet in FPWM mode?

    *Original question >  TPS62872-Q1: Low-side FET negative current limit, DC

    Regards,

  • 0 in reply to User6781210
    TI__Genius 16731 points

    Hi,

    There is misunderstanding here as datasheet has missed the (-) sign, Low-side FET negative current limit is enabled to prevent excessive current flowing
    backwards to the input in FPWM mode. The parameter you are looking is (-7.5A(min) and -12A (max). 

    Terminology we used for LSFET current limit during short circuit is LS FET forward current limit. 

    Best regards,

    Tanvee